Supply Ability: | 100 Set/Sets per Month; | Warranty: | 1 years; |
Color: | Red; | Packaging Detail: | Wooden splints and packing; |
Voltage: | 220; | Port: | guangzhou; |
Payment Terms: | L/C,D/A,D/P,T/T,Western Union; | Power: | 220V 50HZ; |
Quantity(Pieces) | 1 - 100 | >200 |
Est. Time(days) | 30 | To be negotiated |
fuel injection test analyzer
Model:CD-810
Technical characteristics:
Operating voltage: 220V AC 50Hz Power: 400W
Testing of cylinders: 8
Speed range :0-9950r / min conditioning step: 50r/min
Pulse width :0 - 20ms adjustment step: 0.1ms
Total time :0-9950 time adjustment step: 50
System pressure :0-6 .5kg/cm stepless adjustment
Comprehensive simulation of automotive analysis to detect any condition
No EFI pump automatic delay off signal
Standard connectors and special connectors configured
Product Ten Features
1 large digital display system, a clear reading of reading test data.
(2) the distribution of key liberal and reasonable, easy to operate cool hand.
3 high-precision stainless steel seismic pressure large surface display system.
4 has a high brightness backlight unit, easy to observe.
5 large glass tubes imported as a test cylinder.
6 unique stepless voltage regulation mode, when the regulator is more accurate.
7 to adapt to a variety of high / low resistance, voltage / current detection injector cleaning.
8 fully realistic simulation of various engine operating conditions, determine the fault bit does not leak.
9 automatic cleaning can be a key, you can enter data for testing cleaning.
10 The control circuit uses a large-scale high power output so that stable and reliable quality.
Advantages:
This series of products of high quality imported electronic parts, high-speed chip, high-power module fine line professional development, to meet different users in a number of similar products in the gathering long as the other person can not have
Cd-810 technical features
Operating voltage: 220V ac 50Hz power: 400W
Number of test cylinders: 8
Speed range: 0-9950r/min step length: 50r/min
Pulse width: 0--20ms step length: 0.1ms
Step length: 50 times
System pressure: 0-6.5kg/cm stepless regulation
Full simulation of any vehicle operating conditions for testing and analysis
No ejection signal oil pump automatic delay shutdown
Standard fittings and special fittings