Car Modified Off-road Vehicle Universal 630MM Handle Extended Hydraulic Hand Brake Drift Long Vertical Hand Brake

Car modification handbrake / competitive hand brake / hydraulic hand brake / rear brake lever / drifting hand brake
Product: 630MM drift hydraulic handbrake
Material: aluminum alloy
Color: Black
Description: The hydraulic handbrake is a stunt car driving performance stunt, rally must. The hand brake is braked, and the rear wheel is locked to lose the grip force for circular motion. Since the vehicle is in a moment of sudden braking, the body swing is large, so the drift is very good. When a sharp turn is required, the handbrake is required. The specific operating procedure is: first speed down before turning, use handbrake when entering the corner, adjust the handbrake level and time according to the road surface and speed, use the handbrake during driving. It may cause damage.
 
Modification method: Change the hydraulic pump!! Change the oil pressure brake tube, and then change the line position. If it is the pedal front brake, you have to avoid it.
The shock absorber should have a hydraulic brake caliper fixed angle. The steel ring should be equipped with a disc brake disc. Also buy a hydraulic oil pump.
And hydraulic tubing.
 
The drifting hand brake allows the rear tire to be fully locked, which will slide your car to the side. The handcart lever can be installed in a vertical or horizontal position for easy access when driving. Features: High quality aluminum machining allows the rear tire to be fully locked, allowing the vehicle to be sideways The Road Direct Replacement E-brake Treatment Rod is designed to be mounted in a vertical or horizontal position for easy access to the drift-reinforced design of the sponge-treated packaging design, comfortable, durable, non-slip adjustable pre-load and pin position, allowing for different customizations.
 
The so-called drift refers to the fact that the car is turning at a high speed while driving at a high speed, and the wheel is sliding laterally. The drift is a driving skill. In recent years, the "drift" game is one of the most popular games in Japan.
 
Next, introduce several common drift methods:
Handbrake steering: Handbrake brake, locking the rear wheel to make it lose the grip and make a circular motion. Since the vehicle is in a moment of sudden braking, the body swing is very large, so this drift is very good.
When a sharp turn is required, the handbrake is required. The specific operating procedure is: first speed down before turning, use handbrake when entering the corner, adjust the handbrake level and time according to the road surface and speed, use the handbrake during driving. It may cause damage.
 
Bomb clutch: When entering the corner, quickly step on and release the clutch, it feels like the bounce, so that the drive wheel loses in an instant
Go to the grip, and make the side slip with the direction and the brakes.
 
Gravity drift: The vehicle decelerates properly when entering the corner, and then fully depresses the throttle when exiting the corner. The center of gravity of the vehicle is instantly transferred to the rear, the front wheel is already turning, and the rear wheel of the vehicle is still moving in a straight line. The inertia of the vehicle is generated by gravity. The rear wheel continues to move in a straight line to produce a side slip, but it must be fully powered to be successful.
 
Brake drift technology: This is a high-tech movement in the drift. The protagonist in the film should use this technology, which is to press the brakes at high speed when entering the corner, and shift gears to match the steering wheel to make the vehicle tail. This technology The height of the car is required to be one.
 
A part is a part of a machine that consists of several parts that are assembled together. During mechanical assembly, these parts are first assembled into parts (component assembly) before they enter the general assembly. Some parts (called sub-parts) are Prior to entering the assembly, additional components and parts were assembled into larger parts. Large parts that were assembled from several sub-assemblies and have independent functions were called assemblies in the automotive and certain other machinery industries.