CBD Best Seller Soak Hemp Ethanol centrifugal extractor

                                           New Arrival CBD Best Seller Soak Hemp Ethanol Centrifugal Extractor

1. The structure design is reasonable, the sanitary corner is effectively eliminated, the structural parts are smooth and smooth, the surface is polished, and the external structural parts, fasteners and drums are all made of stainless steel. The housing is flip-top for thorough cleaning of the centrifuge housing and drum compartment space.
2. The base and the casing are welded as a whole, and the bearing strength is high.
3. The base is a flat structure, which reduces the center of gravity of the machine, and the installation space is smaller. The flat frame can be used as an operation platform, which is more convenient to operate.
4. Configure the liquid damping damper to eliminate vibration more effectively and simplify daily maintenance.
5, the shell flip, set the feeding tube, washing tube, observation mirror, lighting hole. The online cleaning system (spraying system) is configured to clean the invisible parts inside the centrifuge, such as the inner wall of the centrifuge casing, the inner and outer surfaces of the drum, and the surface of the sump, to ensure the cleanliness requirements and comply with GMP regulations.
6, the structure is simple, easy to operate and maintain.
7. Strong versatility and wide application range. It can be used for the separation of solid phase granular suspension or for the separation of fibrous materials.
8. It can be started by inverter, stable starting, adjustable separation factor; non-contact type energy consumption braking system; anti-static belt transmission; closed structure of the body, the seal is made of silicone rubber or fluororubber. It can realize sealed explosion-proof requirements and is suitable for applications in toxic and flammable and explosive places.
9. Configure the nitrogen protection system to ensure that the inner chamber of the centrifuge is isolated from the outside air.
10. The grain is not easily broken.
11. The PSF centrifuge uses a direct-coupled explosion-proof motor to eliminate the friction dust that may be brought by the belt drive. At the same time, the centrifuge has a smaller footprint because the motor is installed at the bottom of the machine. The above configurations are for chemical and pharmaceutical use, and can be selected according to specific requirements to meet technical and economic requirements.
The above configurations are for chemical and pharmaceutical use, and can be selected according to specific requirements to meet technical and economic requirements.
Standard configuration:
Structure: The cover is equipped with a flip cover and a feeding tube, a washing tube, a sight glass, an exhaust port, and an illumination hole; the sealed structure, the drum, the outer casing, the flip cover and the like are made of stainless steel material (SUS304).
All fasteners are stainless steel.
Transmission and braking: ordinary motor (or explosion-proof motor) + friction type automatic clutch + friction type manual brake device. CMZ adopts direct-connected explosion-proof motor and inverter control.
Electric control device (control box)
Damping damper.
Optional configuration:
Online cleaning system. Nitrogen protection system. According to the anti-corrosion requirements of the materials separated by the user, the corresponding stainless steel materials (SUS304, 316, 316L, 321, etc.) or titanium (TA) are used. The surface of the part in contact with the material is lined with rubber, lining PE, and lining halar.
Over vibration protection device. Open the cover protection device. On-site explosion-proof button. Transmission and braking: ordinary motor + inverter + energy braking.

Technical Parameters:

#220Volts 50/60Hz  3Phase  available#