Electric Corded Impact Wrench

Electric Wrench Detail:
1.Input power: 300,600,1050,2800W
2.Impact rate: 1400,1750,1900,2200r/min
3.Mix.Torque: 98,150,200,250,350,500,850,1100Nm

4.Bolt size:M6-M12,M10-M16,M14-M22,M18-M24,M22-M30,M30-M45

5.Collet chuck size:12.7*12.7,19*19,25.4*25.4mm

6.Weight: 1,1.5,2,2.5,3,3.5,5,10,12kg

7.Certificate: GS,CE, EMC,ROHS

Electric Wrench Features and Functions:

1. Electric wrench is a power tool for tightening and loosening bolts and nuts. It is a tool for tightening high-strength bolts.
2. Initial screwing of initial, final and torsion-type high-strength bolts for the construction of large-hexagon high-strength bolts for steel structure bridges, plant buildings, chemical and power generation equipment, and torque or shaft for bolt fasteners Where there are strict requirements for force.

3.Compared to straight type, the angled is more suitable for limited working space, precise planet structure, high torque/ weight ratio, low noise, Strong and durable, No leakage and easy maintenance.

4.Powerful motor delivers more output power for increased performance. Soft grip for increase comfort. Forward/Reverse operation rocker switch.

5.Improved Technology, high quality & reliability, popular design, durability and usability.
6.OEM / ODM order and customer design are welcomed. 

Usage note:
1. Before the tool is powered on, you need to check that the switch is off to insert.
2. Check if the voltage required by the power supply on the site matches the voltage required by the electric wrench, and whether there is a leakage protector.
3. Select the matching sleeve according to the nut size and install it properly.
4. The voltage is too high or too low to be used.
5. Do not use Simplified as a hammering tool.
6. Do not add force to the lever or the crowbar.
7. The metal case of the electric wrench needs to be reliably grounded.
8. Check the tightening condition of the electric wrench body mounting screws. If the screws are loose, you need to re-tighten them immediately.
9. Check that the handles on both sides of the hand-held electric wrench are in good condition and the installation is firm.
10. Standing on a ladder or working at a high position should be done to prevent falling from height.
11. If the work site is away from the power source and you need to extend the cable, you need to use an extended cable with sufficient capacity and qualified installation.

If you are interested in our Electric Wrench, please don't hesitate to contact us.