- Products
- Products
- Companies
38 in 1 Mini Grinder Wireless Charging Engraving Pen Drilling Cutting Polishing Sander DIY Engraving and Grinding Three-speed Power Tool
-
Supplier: Shenzhen rongxingtong Electronics Co., Ltd -
Region: Guangdong, China -
Contact: Ms Angel C -
Price: $14.28 / 1 - 9 pieces
$14.00 / 10 - 49 pieces
$13.48 / 50 - 999 pieces
$9.80 / >=1000 pieces -
Min. Order: 1 piece
Product details
| Energy source: | electrical | Origin: | melon |
| Rated input power: | 8W | port: | Yantian |
| payment terms: | L/C, Western Union, D/P, D/A, T/T, MoneyGram, PAYPAL | No-load speed: | 5000 |
| model: | 38 in 1 wireless mini grinder | type: | mini grinder, angle grinder |
| brand: | Receiving end | Variable speed: | No |
| grade: | DIY | Packaging Details: | Box |
| Rated voltage: | 5V | Charging interface: | type c |
Product Description
Specification
thing | value |
grade | DIY |
birthplace | melon |
brand | Receiving end |
model | 38 in 1 wireless mini grinder |
type | Angle Grinder |
variable speed | No |
weight | |
energy source | electrical |
type | mini grinder |
No-load speed: | 5000 |
Rated input power | 8W |
charging interface | type c |
Rated voltage | 5V |
Product Description:
Name: Mini Sander Nail Sander Wireless Charging Tool
Applicable grinding head shank diameter: 2.35MM
Chuck depth: 25MM
Speed: 5000-10000-18000 third gear
Power: 8W
Use time: 3 levels of no-load operation for more than 1 hour, if you need to use it for a long time, you can use it while charging.
Battery voltage: 3.6V
Battery capacity: 300MAH
Charging: 80% charging in 30 minutes and 60 minutes.
Bare weight: 58g
Charging notice:
1. The electric power of the mill is generally about 50% when it leaves the factory. It should be fully charged before first use.
2. The charging port is the same as the charging port of USB-TYPE-C and Android phone.
3. Please use a standard USB charger or computer USB to charge the mill
4. Do not cover the item when charging to ensure good heat dissipation.
5. Power display: 1 light=30% 2 lights=31%~70% 3 lights=71%~full
6. After fully charged, the mill will automatically turn off the light.
7. When not in use, it should be fully charged, and charged once every six months.
Kind tips:
This model has low power and is suitable for non-professional grinding. It is suitable for small-scale engraving and grinding.
Do not place the mill in a high temperature environment above 40 degrees.
Instructions:
☆ Install grinding head:
1. Put the grinding head into the chuck
2. Tighten the fastening screw of the grinding head with the matching inner hexagonal wrench
☆ Start use:
1. Lightly press the power supply to enter the first gear working state, and the speed is about 5000 rpm
2. Press the power button again to enter the second gear working state, and the speed is about 10,000 rpm
3. Tap the button again to enter the third gear working state, the speed is about 18000 rpm
4. Tap the button again to enter the shutdown state
5. During use, the load display will display the load status in real time according to the situation.
6. Overload display, when the load is too large, the overload display lights up for 2 seconds.
7. The user can grasp the load situation according to the usage situation, please use it within the overload range.
Package Details:
1 x host
1 charging cable
Drill 1.0mm 1.5mm
Slice 22mm 25mm 32mm
1 connecting rod
30 grinding needles
1 metal grinding head
Name: Mini Sander Nail Sander Wireless Charging Tool
Applicable grinding head shank diameter: 2.35MM
Chuck depth: 25MM
Speed: 5000-10000-18000 third gear
Power: 8W
Use time: 3 levels of no-load operation for more than 1 hour, if you need to use it for a long time, you can use it while charging.
Battery voltage: 3.6V
Battery capacity: 300MAH
Charging: 80% charging in 30 minutes and 60 minutes.
Bare weight: 58g
Charging notice:
1. The electric power of the mill is generally about 50% when it leaves the factory. It should be fully charged before first use.
2. The charging port is the same as the charging port of USB-TYPE-C and Android phone.
3. Please use a standard USB charger or computer USB to charge the mill
4. Do not cover the item when charging to ensure good heat dissipation.
5. Power display: 1 light=30% 2 lights=31%~70% 3 lights=71%~full
6. After fully charged, the mill will automatically turn off the light.
7. When not in use, it should be fully charged, and charged once every six months.
Kind tips:
This model has low power and is suitable for non-professional grinding. It is suitable for small-scale engraving and grinding.
Do not place the mill in a high temperature environment above 40 degrees.
Instructions:
☆ Install grinding head:
1. Put the grinding head into the chuck
2. Tighten the fastening screw of the grinding head with the matching inner hexagonal wrench
☆ Start use:
1. Lightly press the power supply to enter the first gear working state, and the speed is about 5000 rpm
2. Press the power button again to enter the second gear working state, and the speed is about 10,000 rpm
3. Tap the button again to enter the third gear working state, the speed is about 18000 rpm
4. Tap the button again to enter the shutdown state
5. During use, the load display will display the load status in real time according to the situation.
6. Overload display, when the load is too large, the overload display lights up for 2 seconds.
7. The user can grasp the load situation according to the usage situation, please use it within the overload range.
Package Details:
1 x host
1 charging cable
Drill 1.0mm 1.5mm
Slice 22mm 25mm 32mm
1 connecting rod
30 grinding needles
1 metal grinding head
VIEW MORE
You may like
-
XMGT Hot Sale Portable Professional Customizable Wood Carving Cutting Disc for Angle Grinder Electric Angle Grinder
-
Hot Sale Portable USB Rechargeable Handheld Electric Grinding Tool Set High Speed Mini Engraving Pen
-
High Power Portable Cord Cutting and Polishing Angle Grinder for AC Power Tools
-
Portable Mini Electric Cereal Grinding Set
-
KMD01-C60B 3.6V Ni-cadmium battery mini drill and mill set small mold DIY jewelry engraving and cutting electronic power tool set BMC bag
-
Dremel Rotary Tool Kit with Flexible Shaft Variable Speed Carving Tool Kit Woodworking Tools Mini Grinder
-
276 PC Rotary Tool Accessories Mini Drill Bit Set Abrasive Tools Grinding Polishing Polishing Cutting Tool Sets
-
Power Tool Multi-Purpose Angle Grinder For Sale
-
ROUTE Granite, Stone Router and Profile Edge
-
Professional Manufacture Free Angle Grinder 110 Volt 125mm 115mm 125mm
Other Products
-
$20.50 - $50.50 / piece
