2023 Newest XTOOL D7 Car Full System Code Reader Key Programmer OBDII Scanner xtool Car Diagnostic Tool PK MK808 CRP909E

Product Description

XTOOL Official Mall Commitment

1. All products in this store can be promised100% original(with serial number verification)

2.1 Year Warranty and Lifetime Technical Support

3.24 hours online service remote support

4.3-5 daysfast shippingfromOverseas warehouse(US/Russia/Poland/Spain/UK/France)

XTOOL D7 is a full-system diagnostic scanner, which can quickly detect the status of each system module, perform faster diagnosis and maintenance by reading/clearing codes, viewing real-time data, etc., and complete a full scan in just a few minutes . You can learn to perform complex diagnostic functions that will give you more insight into the ins and outs of your car to figure out what's going on with a modern computerized vehicle so you can fix it and restart in due course for the road.

Its capabilities in system-wide diagnostics are briefly outlined below:

1. For the engine system:The diagnostic tool XTOOL D7 can help detect engine ignition, fuel injection, air-fuel ratio and exhaust emission conditions in the engine system to improve vehicle performance, save energy and reduce exhaust emissions.

2. For transmission:When your car is slipping or struggling to shift gears, which can make a lot of sense for safe driving, the diagnostic tool can pinpoint problems by reading codes in the transmission system, or check health with real-time data viewing.

3. For ABS system:Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you need to retrieve the ABS codes to tell you where the problem is, and that's what this diagnostic program does for you.

4. For SRS system:SRS, Safety Restraint System, consists of crash sensors, control modules and the airbag itself, this diagnostic tool can detect each electronic parameter to check its health.

5. Diagnose the braking system:If you feel the brake pedal go soft and notice unusual smells or noises etc. Proper operation of the braking system is essential to ensure safe control and operation of the vehicle;

6. Diagnose the exhaust system:If the system is affected by vehicle age or poor quality fuel. A good exhaust system can greatly reduce harmful gases and avoid fines;

7. Diagnose the fuel system:If the vehicle will not start or the "Check Engine" light comes on. Check your car's fuel system regularly to ensure your car is performing at its best with the lowest emissions;

8. Diagnostic transmission:If your car is slipping or having trouble changing gears. This system plays an important role in the overall performance of your car;

9. Diagnose the wiper system:If you observe fluttering or streaking on the wipers. If you do not check your car regularly, accidents may occur due to blindness;

10: Diagnostic light system:If you see fast signal flashes or dimmed lights.

There are a lot more....

[24 Advanced Service Features]

As an advanced diagnostic tool, XTOOL D7 has various accessible services for complete diagnosis and maintenance. You can quickly access vehicle systems in this function.
You can find common reset functions in the reset menu, and other special functions in the menu of the car brand's diagnostic software.

*Service/Maintenance Light Reset:The car maintenance light is on, indicating that the vehicle needs maintenance. After the maintenance, the driving time will reset to zero, the maintenance light will

*EPB Reset:This feature serves multiple purposes to safely and efficiently maintain the electronic braking system. Applications include deactivating and activating brake control systems, auxiliary brake fluid control to open and close brake pads, and setting brakes after changing discs or pads, etc.

*SAS adjustments:To reset the steering angle, first find the relative zero position where the car is driving straight. Using this position as a reference, the ECU can calculate the accurate left and right steering angles.

*DPF regeneration:DPF regeneration is used to remove PM (Particulate Matter) in the DPF filter through continuous combustion and oxidation methods (such as high-temperature heating combustion, fuel additives or catalysts to reduce PM ignition combustion) to stabilize filter performance

*Injector code:Write the actual code or rewritten code of the fuel injector in the ECU into the fuel injector code of the corresponding cylinder, so as to control or correct the fuel injection amount of the cylinder more accurately

ABS bleeding:When the ABS contains air, the ABS bleed function must be performed to bleed the brake system to restore the ABS brake sensitivity

* Gear Learning:After replacing the engine ECu, crankshaft position sensor or crankshaft flywheel, or DTC 'gear not learned', gear learning must be performed.

*BMS reset:BMS (Battery Management System) allows scan tools to assess battery state of charge, monitor closed circuit current, register battery replacements, and activate the vehicle's standstill

*Gearbox matching:When the gearbox is disassembled or repaired (the car battery is powered off), it will cause a delay in shifting gears. In this case, you need to do this so that the transmission automatically compensates for better shift quality depending on the driving situation

*SRS Reset:This function clears the airbag data and clears the airbag collision fault indicator

*TPMS Reset: This function allows you to quickly find the tire sensor ID from the vehicle's ECU, as well as perform a TPMS replacement and sensor test

*Air Suspension:This function can adjust the height of the body. When replacing the vehicle height sensor in the air suspension system or control module or the vehicle level is incorrect, this function needs to be performed to adjust the vehicle height sensor for level calibration

*Throttle relearn:electricity. Throttle Adaption is to use the car decoder to initialize the throttle actuator, so that the learning value of the ECU returns to the initial state.

*Headlight adjustment:This function is used to initialize the adaptive front lighting system.

*Tire modification:This function is used to set size parameters for refitting or changing tires.

*Window initialization:This function is designed to perform door and window matching, restore the initial memory of the ECU, and restore the automatic lift function of the electric window

*Electronic water pump activation:Use this function to activate the electronic water pump before venting the cooling system.

There are a lot more...

Active testing (two-way control)

XTOOL's latest D7 automotive scanner can activate solenoids and actuators for active testing, sending commands to systems/components to test their working status without using vehicle controls. It can read/erase codes, view live data, retrieve ECU information, perform active test and service functions on all systems including ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, fuel system, lighting system and A/C system, etc.

ECU coding

Match, learn, or code a newly replaced ECU; customize your car, unfold hidden features, or disable annoying ones; reprogram adaptive data of certain components after repair or replacement

Automatic VIN scan for quick diagnostics

Once the diagnostic tool and a given car are properly connected, the diagnostic tool XTOOL D7 starts an automatic detection process. With just one click, you can scan your car's detailed version information, as well as a real-time data stream of all diagnostic trouble codes and full electronic control units. If desired, you can view diagnostic information for the selected system only as an inspection

XTOOL D7 supports battery tester function

XTOOL D7 supports four-in-one graphic data stream:

4 types of Data Dream 1 Graphic display, better

Real-time data flow graph:
Provides very detailed stream data, which may include changes in accelerator pedal position sensor 1, actual output shaft speed, clutch A actuator motor, vehicle battery, etc. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.

Real-time data stream recording:
Allows you to record live data streams and view data at a specific point in a targeted manner. so that you can see the data more clearly.

Real-time data stream playback:
After you have recorded data for a period of time, if you want to view and analyze the data just recorded, you need to use the data stream playback function to help you. You can view the recorded data at any time. You can then choose Consolidate, Report and Log.

Real-time data stream sharing:
Let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complicated problems.

Full 10 Modes OBDII/EOBD/JOBD Car Diagnostic Functions:

This scanner supports all 10 test modes of OBD-II cars, making it ideal for routine maintenance work. The following table describes the purpose of each operating mode:

1. Read the code:Displays detailed descriptions of Diagnostic Trouble Codes (DTCs)

2. Erase code and reset:Turn off the check engine light (MIL), clear the code and reset the monitor.

3. Data flow:Read and display live ECU/PCM data streams, graph functions and store freeze frame data.

4. I/M readiness status:Indicates whether the various emissions-related systems on the vehicle are functioning properly and are ready for inspection and maintenance testing.

5. Read the real-time data stream:Displays information from the vehicle's continuous data stream in a real-time graphical (waveform) display.

6. View freeze-frame data:Check certain vehicle conditions recorded by the on-board computer in the event of an emissions-related fault.

7. O2 sensor test:Allows retrieval and viewing of O2 sensor monitoring test results for the most recently performed tests from the vehicle's on-board computer.

8. Vehicle display test:Retrieves and displays test results for emissions-related powertrain components and systems.

9. Read vehicle information:Display VIN (Vehicle Identification Number), CID (Calibration ID), CVN (Calibration verification number) and other information.

10. Component testing:Certain vehicle components can be activated by commands sent from the scanner to test their operability

Key programming features:

1. New button programming
2. Use EEPROM to read PIN code
3. Hex Editor (Win Hex)
4. Read the key from the memory of the immobilizer
5. New anti-theft programming
6. VIN programming
7. Reset ECM and reset immobilizer
8. Add remote control programming
9. Have a complete and powerful database of the most important vehicle brands

multilingual support

XTOOL D7 can support multiple languages: English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and Traditional Chinese.
(Please send the device serial number, we will help you authorize the language, you can switch freely)

XTOOL D7 supports cars

Australia: For Demo, For Ford

China: DEMO, JAC, Chery, Geely, Great Wall, BYD, Lifan

USA: DEMO, GM, FORD, CADILLAC, CHEVROLET, GMC, HUMMER,

Suitable for JEEP, suitable for SATURN, suitable for PONTIAC, suitable for LINCOLN, suitable for DODGE, suitable for CHRYSLER, suitable for BUICK

Asia: Demo, TOYOTA -LEXUS, ISUZU, MAZDA, KIA, INFINITI,

For Acura, For Nissan, For Renault Sam, For Hyundai, For Hyundai, For Honda, For Subaru,

Suzuki, Mitsubishi, Ssangyong

EU:

For DEMO, for VW, for MINI, for LANDROVER, for SEAT, for FERRARI, for FORD, for OPEL, for ALFA, for ROMEO, for VOLVO, for ABARTH, for SMART, for BMW, for FIAT, for LANCIA,

Renault, Aston Martin, Gass, Maserati, Meredith, Uzi, Skoda, Citroen, Dacia, Audi, Jaguar, Porsche, Peugeot