CADDY sealing speed regulating glue machine glass bottle glue machine

1. This machine is suitable for shoemaking, leather products, stationery, belt whole factory equipment and covers, photo frames, sports equipment, etc., and can be freely adjusted to the required thickness.

2. The sealed type runs for a long time, will not evaporate, never solidify, and the machine will never be like new without cleaning.

3. Fully automatic stepless speed change control, the speed can be adjusted freely.

4. Both super glue and gasoline glue can be used. It is equipped with a swivel device. When the machine is shut down, the recyclable glue will never fall off, and the amount of glue can be adjusted accordingly.

5. The machine adopts the design of sealed glass tank, the glue is not easy to volatilize and solidify, which meets the environmental protection requirements of European and American countries for glue-free glue. Adjust the handle to adjust the amount of glue applied. It is equipped with a 360-degree swivel mechanism. When the machine is not in use, the glue can be recycled into the glue pot, no glue leakage, easy to operate, easy to clean, and labor-saving.

How to use and precautions:

1. Confirm that the power supply is 220V before plugging in.

2. Check whether the back plate is completely positioned after reverse twisting, and whether the nut is locked.

3. Attention! When turning on the power, first confirm (whether the speed control button is reset to zero), if the power is turned on before it is reset to zero, the circuit and motor will be burned out, and unnecessary losses will be increased.

4. Attention! Be sure to use a 5A fuse. If you use a fuse that exceeds 5A, it will not provide protection and cause the circuit to burn out.

5. Adjust the glue bottle to the upright position when working, and adjust the glue bottle to the inverted position when resting.

6. Do not touch the embossing wheel with the rubber wheel.

7. When leaving get off work, it is necessary to wipe off the glue on the surface of the glue head with white electric oil.

8. When using it again, you need to turn the handle at the back of the motor by hand to check whether the rubber head is stuck or dry before starting to use it.

9. When using, please keep your hands away from the feeding place.

10. Do not disassemble the rubber head for cleaning.