Scanning (tracking) points: | Chapter 461 | Frequency Resolution: | 1 Hz |
model: | HSA2030A | payment terms: | L/C, Western Union, D/P, D/A, T/T, MoneyGram |
Number of markers: | 4 | pay: | TT |
brand: | Hantec | -3dB Bandwidth: | 10Hz to 1MHz, 1-3-10 sequence |
Frequency Range: | 9KHz~3.2GHz AC coupling | Origin: | Guangdong, China |
Reference frequency: | 10 MHz | port: | Shenzhen |
Number of traces: | 4 | MOQ: | 1 |
feature
· Frequency range: 9KHz-3.2GHz (adjustable to 9KHz) AC coupling
Best Sensitivity: -161dBm RBW: 10Hz to 1MHz
· IP-51 high protection portable design, sturdy and durable, can be used in the laboratory, more suitable for mobile use in the field.
·Built-in large-capacity lithium battery, can work continuously for more than 4 hours. 18650 rechargeable battery.
· 5.6-inch bright color display, 640*480 resolution, clear waveform display.
· HSA2000 series spectrum analyzer has the lowest DANL and SSB phase noise and the narrowest RBW. Greatly enhanced the ability to identify stray signals and noise signals.
· Optional FM/AM modulation analysis including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
• Standard spectral characteristics. It can analyze the signal time stability and accurately find out the cavity signal in the communication system.
· Powerful field strength test function, suitable for testing transmitters, base stations, and antenna coverage sites. It can display field strength or power density. Users can also use the amplitude offset function to calibrate gain or loss.
· HAS2000 series has the least RBW among analyzers of the same level, and can easily confirm, distinguish and measure two similar signals.
· 5.7-inch high-brightness color display, accurate, bright and clear internal and external tracks, no need to move to a shading place for work.
· Short scanning time. It quickly captures data and helps locate and identify irregular transient disturbance signals, optimizing test time and accuracy.
· Adopt advanced built-in battery management system. The standard configuration is a large-capacity 7800mAh lithium battery, supporting 6 18650 battery packs, which can ensure more than 4 hours of on-site measurement work.
· Sturdy and compact mechanical structure, tightly sealed with rubber sleeves, suitable for harsh on-site working environments.
· Integrated USB Host & Device, support U disk storage, optional WIFI/LAN, convenient for networking and remote control.
· The upper computer software can realize the management and storage of test data.
· HSA2000 series field measurement application.
parameter | |||
Model | HSA2030A | HSA2030B | |
frequency | |||
Frequency Range | 9KHz~3.2GHz AC coupling | 9KHz~3.2GHz AC coupling 5M~3.2GHz TG | |
frequency resolution | 1 Hz | ||
reference frequency | 10 MHz | ||
Frequency Reading Accuracy | ±(frequency indication*frequency reference uncertainty+1%*span+20%RBW+cursor resolution+1Hz) | ||
Internal 10MHz reference accuracy | aging rate | ±1ppm/year (0℃~50℃, refer to 25℃) | |
temperature stability | ±1ppm/year | ||
Mark resolution | (frequency span)/(sweep points-1) | ||
Resolution Bandwidth (RBW) | |||
-3dB bandwidth | 10Hz to 1MHz, 1-3-10 sequence | ||
accuracy | ±5% RBW=10Hz~1MHz nominal value | ||
Resolution Filter Shape Factor | <5:1 nominal | ||
Video Bandwidth (VBW) | -3dB bandwidth | 1Hz to 1MHz, 1-3-10 sequence | |
accuracy | ±10% VBM=1Hz~1MHz nominal value | ||
Displayed average noise level (normalized to 1Hz) | |||
9K~1MHz | preamp off | -108dBm, typical -127dBm | |
1MHz~10MHz | -128dBm, typical -146dBm | ||
10MHz~500MHz | -142dBm, typical -146dBm | ||
500MHz~2.5GHz | -141dBm, typical -145dBm | ||
2.5GHz~3.2GHz | -140dBm, typical -144dBm | ||
9K~1MHz | preamplifier on | -131dBm, typical -150dBm | |
1MHz~10MHz | -148dBm, typical -163dBm | ||
10MHz~500MHz | -161dBm, typical -164dBm | ||
500MHz~2.5GHz | -159dBm, typical -162dBm | ||
2.5GHz~3.2GHz | -158dBm, typical -161dBm | ||
SSB Phase Noise | |||
Carrier offset (20℃~ 30℃,500MHz Center frequency) | 10K | < -92 dBc/Hz, typical -95 dBc/Hz | |
30K | < -93 dBc/Hz, typical -96 dBc/Hz | ||
100,000 | < -95 dBc/Hz, typical -97 dBc/Hz | ||
1 MHz | < -117 dBc/Hz, typical -119 dBc/Hz | ||
Scan time | |||
scope | Span>100Hz | 2 milliseconds to 1000 seconds | |
Span=0Hz | 600 ns to 200 s | ||
scan mode | continuous, single | ||
trigger source | free run; video; external | ||
trigger slope | Positive or negative edge selectable | ||
trigger delay | Span=0Hz | ±12ms to ±12s nominal | |
frequency counter | |||
Counter resolution | 1 Hz | ||
accuracy | ±(marker frequency × frequency reference uncertainty + counter resolution) | ||
Level display range | |||
Log scale and units | 1 to 10 dB/div in steps of 1, 2, 5, 10 dB, displaying 10 divisions | ||
Linear Scale and Units | 0 to 100%, 10 grid display | ||
proportional unit | dBm, dBmV, dBuV, Watts, Volts | ||
scan (trace) points | Chapter 461 | ||
number of marks | 4 | ||
detector | Normal, Pos Peak, Damping, Neg Peak, RMS | ||
Number of traces | 4 | ||
trace function | Clear/Write, Max Hold, Min Hold, Average, Check, Off | ||
Liquid level measurement error | ±1.5dB (excluding input VSWR mismatch) 20~30℃, peak detector, preamplifier off, input signal -50dBm to 0dBm | ||
reference level | |||
Predetermined area | -100dBm to +30dBm, step size 1dB | ||
set resolution | logarithmic scale | 0.01dB | |
linear scale | Almost Logarithmic (2.236µV to 7.07V) | ||
amplitude | |||
Maximum Safe Input Level | average continuous power | +33dBm | |
DC input voltage | 50V DC | ||
Measuring range | 9KHz~2MHz | Displayed Average Noise Level (DANL) to +10dB | |
2MHz~3.2GHz | Displayed Average Noise Level (DANL) up to +20dB | ||
Input attenuator range | 0 to 51dB, 1dB step | ||
spurious response | |||
Second Harmonic Distortion (SHI) | <65dBc, 50MHz to 3.2GHz (mixer level -30dBm, attenuator = 0dB, preamplifier off, 20℃~30℃) | ||
third order Intermodulation (TOI) | 50~300MHz | +8dBm, third-order intermodulation products: 2 x -20dBm; frequency interval 100KHz: attenuation = 0dB; preamplifier off, 20℃~30℃ | |
300MHz~3.2GHz | +10dBm | ||
Input related spurs | <-75dBc, (input mixer=-30dBm) | ||
intrinsic residual response | <-90dBm, typical -98dBm (input terminated and 0 dB RF attenuation, preamp off) | ||
RF input VSWR (at tuning frequency) | 10MHz to 3.2GHz | <1.5:1, nominal attenuator setting 10~20dB | |
10MHz reference/external trigger input | |||
Reference input frequency | 10 MHz | ||
Reference input amplitude | 0~10dBm | ||
trigger voltage | 5V TTL level | ||
Connector and Output Impedance | Type N female; (50Ω) |
FAQ
A: Payment terms:
T/T, Western Union, Paypal, Bank Transfer
B: Shipping:
1. By EMS, DHL, FedEx, TNT, UPS or other express.
2. By your own forwarder.
3. Buyers can choose the desired shipping method when ordering.
Three: After-sales service:
All products are inspected and packed in good condition before shipment.
D: Delivery time:
After payment, general orders will be shipped from our factory within 3-5 working days.
customer service
Please contact us by email or phone and we will do our best to help you
China working hours Monday to Friday 9:30-18:30 online service to help buyers solve problems.
Welcome friends from all over the world to visit us!