Portable Soldering Welding Fume Extractor With Welding Fume Arm

 The High quality Portable Soldering Welding Fume Extractor With Welding Fume Arm  for sale , Welding Fume purifier is the ideal solution for self-contained source capture of light duty weld fume and other airborne contaminants in the workplace. This portable, compact fume collector offers simple 120-volt plug-n-go convenience. The welding fume dust collector is designed using the state-of-the art technology in source capture and is a powerful, low-maintenance solution for even tough weld fumes.

The welding smoke extraction unit yyt Clean has a self-cleaning filter in combination with an automatic, contamination-freedust disposal. Its high mobility and a 360-degree operating radius make it the ideal device for continuous use. The simple filter unit easily handles applications with large amounts of smoke and dust.

Our Advantage

1. The purifier shell through pensu processing, beautiful and easy, with four directions at the bottom of the rubber wheel, can protect free to move within the work place.

Match the standard arm length is 2 m or 3 meters, 1.5 meters can be produced according to customer's special requirements, 4 meters, 5 meters, 7 meters, 9 meters. Standard size: 160 mm, 200 mm

2. Advanced fan design, large air volume, low power consumption. Customers can choose different shapes according to the actual situation of suction mouth, to meet the needs of different working conditions, such as: bell mouth, mouth water chestnuts.

3. The suction hood can extend to any want to together with the suction arm reach position. He can breathe in with flexible arm or breathe in two flexible arm. Suction arm can be 360 ° and optional activities, from flue gas in the flue gas absorption, greatly improving the flue gas collection rate, guarantee the health of workers.

4. The filter cartridge adopts antistatic effect of polyester fiber material, higher adsorption performance, security, better filtering effect > 99.9%, long service life and can absorb 0.3 mu m dust particles.

5. Reverse blowing device: manually after the demolition of cartridge dust or semi-automatic soot connect air compressor.

6. Clean air from the outlet grille direction uniformly lead and dispersed, and the casing keep noise to a built-in special sound insulation cotton.

7. The product design, using arms to two location used at the same time, in addition to the welding smoke effect is 99%.

This production USES cartridge filter, filter has big filter area, small size, mobile and flexible, convenient transportation, equipped with castor brake, equipment is equipped with high efficiency fan, suction is strong, work efficiency is high, the dust removal effect is good, the flexible arm can turn 360 degrees, hover at any position, used to absorb all kinds of smoke and dust, solve the problem of environmental pollution from the source, can choose activated carbon filter, used for indoor in addition to taste.

This Fume extractor Adopts filter purification method, efficient German imports (PTFE) coated filter material has high precision, high purification efficiency, material of low cost, without frequent replacement, saving the environment.

Choose import Siemens motor fan, guarantee the equipment efficiency and stable operation.

Device with a built-in automatic pulse ash removal device, to keep constant air volume absorption equipment, and the purification ability of constant.

Unparalleled processing efficiency, under the rated parameters of dust removal rate 99.9%, or deal with the back of the clean air can circulate in the workshop directly emissions.

This Fume extractor device equipped with universal casters, flexible move into any position of the factory, not bound by hair dust spots are not fixed. Brake device, convenient and positioning of the equipment.

Welding fume dust collectors with the method of vertical suspension, configure automatic electronic pulse rotation counter blowing system, filter clean-up can omni-directional, leave no dead Angle, high dust removal rate, compared with the filter horizontal loading mode and traditional way of pulse soot cleaning effect is better, improve the efficiency of dust filter, enhanced dust removal effect and prolong the service life of the filter.

Welding smoke dust collector --How to purify the welding smoke

Usually in welding smoke have 95% is the solder and flux at high temperature small particles, the particles floating in the air under a certain light the human eye can be observed, that is, we can see the smoke. And the other 5% are distributed in the air, gas way our is invisible to the naked eye, and the gas contains large amounts of carbon monoxide, carbon dioxide and methanol, ethanol, methane, formaldehyde and other harmful elements. These particles and harmful aerosols affect the operator's health and pollute the environment. Smoke purification system is through a variety of suitable collector (soldering iron suction tube cover/arm/smoking smoking, etc.) through the pipe installed in a location to collect smoke removal system equipment, by the system within the filter back to the room.

Welding soot is a very complex material, has been found in smoke as many as more than 20 kinds of elements, which is the most abundant Fe, Ca, Na, etc., the second is the Si, Al, Mn, Ti, Cu, etc. Welding smoke and dust, the main harmful substance such as Fe2O3, SiO2, MnO, HF, one of the most abundant of Fe2O3, generally accounts for 35.56% of the total ash, the second is SiO2, its content accounted for 10 to 20%, MnO accounts for 5 ~ 20%.

Metal welding, laser cutting, grinding operation, a large number of dust suspended in the workshop, drawn into the lungs will seriously affect the health and lead to chronic manganese poisoning, serious diseases such as electric welder pneumoconiosis. So you must before welding smoke and dust into the welder breathing zone these harmful smoke purification processing. 

Mobile welding smoke purifier, is a governance specifically for welding, cutting, grinding, produce a large number of floating in the air harmful to human body of fine metal particles and purification plant design, suitable for single and double location, its purification efficiency is high, light and flexible, with 2-3 meters long universal suction arm, move in different work place more convenient and flexible, easy to operate.

Product application case

Cangzhou YiYouTe Equipment Co.,Ltd 

Name: Lisa Email: productvip at 163.com Wechat:8615533738851 Phone:+8613785494211 Skype:lisalisa5202 QQ:2608319637
	Scanning it add wechat