Payment Terms: | L/C,D/A,D/P,T/T,Western Union,MoneyGram; | Brand Name: | Starlight; |
Warranty: | 1 year; | Type: | Flash Drying Equipment; |
Supply Ability: | 15 Set/Sets per Month; | Power(W): | According to the actual system; |
Heat source: | Electric heating/oil furnace/gas furnace/coal furnace/steam; | Port: | Shanghai Port; |
Packaging Detail: | (1)FCL: in nude for standard exporting container (2)LCL: wood case Dunnage bags are used for fixed the machine Plastic film is covered on the machine as a rain-roof.; | After-sales Service Provided: | Engineers available to service machinery overseas; |
Voltage: | 380V; | Temperature: | Automatically controlled; |
Condition: | New; | Weight: | According to the actual system; |
Dimension(L*W*H): | Depend on the system; | Place of Origin: | China; |
Product name: | XSG series rotating drier; |
XSG series rotating flash drier is a new type of drying equipment developed by our company on the basis of absorbing foreign advanced technology. The machine is advanced in technology, reasonable in design, compact in structure, wide in scope of application, high in productivity, good in product quality, high in efficiency, energy saving, drying, crushing and screening in a single equipment completed at one time. Eliminating environmental pollution, and the performance of the machine reaches the international advanced level. Flash drier has the original bearing induction cooling (water cooling). The oil pump is designed to connect lubricating oil and cooling bearings. The sealing device has excellent performance. In the design of the main shaft, the semi-ring type is adopted. The motor uses speed-regulating motor, which has stable transmission, low noise and 10 times the service life of the same kind of products.
Hot air enters the stirring and crushing drying chamber from the bottom of the dryer at an appropriate spouting speed from the inlet pipe, which produces a strong shearing, blowing and rotating effect on the materials. Therefore, the materials receive centrifugal, shearing, collision and friction and are particulated, thus enhancing mass and heat transfer. At the bottom of the dryer, the larger and wetter particles are mechanically crushed under the action of the agitator, and the particles with lower moisture content and smaller particle size are entrained by the rotating air stream and dried further during the rising process. Due to the rotational flow of gas and solid, the inertia of solid is greater than that of gas, and the relative velocity of solid is larger, which enhances the mass and heat transfer.
Type | Treatment wind capacity(m3/h) | Evaporated capacity(kg/h) | Main machine power(kw) |
XSG-2 | 300-800 | 10-20 | 5-9 |
XSG-3 | 600-1500 | 20-50 | 8-15 |
XSG-4 | 1250-2500 | 25-70 | 10-17.5 |
XSG-5 | 1500-4000 | 30-100 | 12-24 |
XSG-6 | 2500-5000 | 40-200 | 20-29 |
XSG-8 | 3000-8000 | 60-600 | 24-35 |
XSG-10 | 5000-12500 | 100-1000 | 40-62 |
XSG-12 | 10000-20000 | 150-1300 | 50-89 |
XSG-14 | 14000-27000 | 200-1600 | 60-105 |
Jingjiang Starlight Dry Equipment-production Co., Ltd. is backbone enterprise specializing in the production of sets of drying equipment. We have complete mechanical equipment and perfect testing means. Our company has always been guided by the market and combined with the scientific and technological strength of many scientific research institutes in China. With excellent products and service customers trust and support, we have introduced advanced production technology, developed and produced a variety of new and efficient drying equipment.
1.How to choose you dry equipment?
At first, please inform us what kind of material you need to dry.
Second, you should inform us how much output you need per hour.
Third, what kind of heat source you have(Electric heating/oil furnace/gas furnace/coal furnace/stream)
2.Can you provide plant layout?
Yes, we can provide. Our clients should provide the CAD drawing and pictures of the scene. According to the CAD drawing, we can design the reasonable layout.
3.What’s your payment terms?
T/T or L/C is acceptable for us. Normally, we required 30% in advance, and 70% before delivery.
4.What about the lead time for delivery?
It depends on the size of the whole system. After confirming the system we use, we can inform the delivery time to you.