NETZSCH Spare Parts Guide

The role of the guide sleeve of the screw pump

The function is to support the shaft, avoid the grinding of the direct transmission shaft and the coupling rod, reduce the damage to the transmission shaft and the coupling device, and play a protective role, so that the shaft can rotate in the shaft sleeve.

Bushings not only reduce equipment wear, vibration and noise, but also provide corrosion protection. It can also facilitate the maintenance of mechanical equipment and simplify the structure and manufacturing process of the equipment.

Screw pump guide sleeve material

Commonly used materials are 45 steel, 40Cr alloy steel, medium carbon steel, bearing steel GCr15 and spring steel 65Mn, as well as 20CrMoTi, 20Mn2B, 20Cr and so on.

Our company commonly used guide sleeve material:

SUS304; SUS316L.

Design and application of shaft sleeve of screw pump

The screw pump bushing is used to connect the rod end and is an important part of the universal joint assembly connecting the rotor and the drive shaft

In these moving parts, due to the friction caused by long-term friction, the parts need to be replaced when they need to be replaced. When the axial clearance and holes are worn to a certain extent, the material bushing must be selected with better wear resistance, which can reduce the shaft and the shaft. Wear between shafts. We had to choose better wear-resistant materials for the bushings, which would reduce shaft-to-shaft wear. When the shaft sleeve is worn to a certain extent, it can be replaced, which can save the high cost of replacing the shaft. When the bushing is worn to a certain extent, it will be replaced, which can save the high cost of replacing the shaft. Generally, the bushing and the shaft are installed with a clearance fit. This installation method cannot avoid wear and tear, and you can only choose to prolong the life of the parts. , the casing parts are easier to produce and the cost is relatively low.

STD Factory Availability

1) ST D's factory has a variety of accessories, we provide quick turnaround to help reduce equipment downtime, you don't need a lot of inventory.

2) Spare parts, which can be shipped quickly, ensuring that production is not interrupted or reduced to a minimum downtime. With good service and very competitive prices, customers can earn time from working with us.

very competitive price

With customers increasingly concerned about operating and maintenance costs, we need to prioritize spare parts prices and availability when evaluating plant savings and efficiency.

Using their engineering knowledge and production capabilities, STD companies are capable of producing spare parts of good quality and competitive prices (spare parts for NETZSCH, SPEEDEX, MONO, VISCOTEC, STD, etc.)

quality assurance

STD is a professional R&D and manufacturer of single screw pumps and accessories. The product quality has been inspected and recognized by customers in the professional market, and won the recognition and praise of customers.

STD Generic Parts Overview

STD has an excellent reputation for the quality of its equipment and parts. In recent years, our mission has been to use our manufacturing and engineering expertise to expand our product offering to include a range of high quality STD general purpose parts for many other brands of progressive cavity (PC) pumps.

We offer STD general purpose parts for use with other brands of progressive cavity pump series below. For others not listed, please contact STD

1) NETZSCH™ 2) SEEPEX™ 3) MONO™

International excellent brand screw pump accessories supply

STD uses its own expertise, manufacturing capabilities and channels to provide a full range of screw pump accessories for major brands in the world (Netzsch, Seepex, Mono, etc.) Shaft joints, pins, pins or complete sets of rotating parts, etc.

We can provide general spare parts under the NETZSCH brand

We can provide general spare parts under SEEPEX brand

We can provide generic spare parts from a single brand

Certification

1) What products does STD offer?
STD provides global solutions for progressive cavity pumps, progressive cavity pump accessories and fluid system products.

Summary of STD's product range

Screw pumps for conveying and metering low to high viscosity media with or without solids

Impregnators for solid and fibrous components in impregnation media

Control systems for monitoring, regulating and controlling processes

Services: Consulting, Commissioning, Maintenance, NETZSCH,Seapac, andmononucleosisGeneral spare parts, repairs and various service contracts

2) Does STD offer custom pumps?

Yes, this is our specialty, we customize different designs and material combinations for each application's modular system. This means that we develop the best technical and most economical solutions for your needs.

3) Can STD spare parts be ordered online?
Yes, STD progressive cavity pumps and spare parts and generic accessories from other brands (NETZSCH, SEEPEX.MONO) can be ordered online. To order, please contact us.

4) How fast can my STD pump be delivered?

Typically, standard pumps are delivered within 4 to 6 weeks. In urgent cases, the delivery time may be between 2 and 5 days. Please contact us. Tel: 0086-189 4242 4342

5) Packaging; Shipping

1) Standard export packing: We pack the pump and accessories in a wooden case and put it in a container. Sea and Air Freight. .

2) The marking on the packing box is carried out according to international standards

3) Please check the packaging and integrity of the goods upon receipt, and report any damage to the carrier immediately.

4) If you have special packing requirements, please inform us.

6) Product quality assurance

According to international standards, the whole pump is guaranteed for 1 year,

Spare parts 6 months warranty

Buyer's Note:

1) Can the screw pump run idly?

No, the conveying elements are in permanent contact with each other, which means that dry running of the progressive cavity pump must be avoided. STD dry running protection device provides reliable protection.

2) What temperature is suitable for using STD pump?
STD progressive cavity pumps can be used in temperatures from -20°C to 150°C (-4 to 302°F).

Company Profile

Guangdong Standard Fluid System Co., Ltd. The largest professional manufacturer in South China About: Screw Pumps, Screw Valves, Evacuation System Screw Products

Screw pumps, screw valves, and emptying system screw products have advanced technology, perfect structure, various forms, complete specifications and durability, and are widely used in sewage treatment, chemical industry, papermaking, food processing, pharmaceuticals, energy, environmental protection, 3D printing and other industries .

The company has a team of engineers with rich experience, mature technology, reliable quality and reliable quality of screw pump design, manufacturing, testing and after-sales service. Provide customers with high-quality products, excellent solutions and efficient services in the field of fluid systems.

While producing and developing screw pump products, it also provides general accessories for global screw products (including German Netzsch, Seepex, Viscotec, British mono and other brand accessories) and maintenance customization services, and provides free technical consulting services and improved optimized designs. Our excellent processing capabilities, rich practical experience and mature technical advantages provide a stable guarantee for our products.

our service

1 Our screw pump series products, reasonable price, high-quality service, provide quality inspection. Welcome to OEM.

2 We have a special quality supervision department to ensure the quality of mass production.

3. If there is a quality problem with the product, deal with it as soon as possible, find out the reason, and take responsibility.

4 If you are interested in our products and company, please leave a message or send an email to us, we will reply you within 24 hours

Why choose us?

1 Factory direct sales, no intermediate links, competitive price

2 Our machines are imported from European original factories, the quality of the products produced is stable, and inferior equipment is not used.

3 To ensure on-time delivery, purchasing, we can provide the best quality service control, shipping, documentation, etc.

4 We provide samples and OEM service.

5 We will respond to your inquiry within 24 hours.

6 Over 20 years of industry business experience and a professional team that make our clients feel at ease when working with us

7 Please contact us by email, we will send you more pictures for more choices of our products.

How to order STD progressive cavity pumps?

1) Sample approval

2) Customers arrange 30% deposit after receiving our PI (Proforma Invoice),

3) We start mass production and complete the production within the agreed delivery time

4) We send shipping documents to customers

5) Client arranges balance payment

6) We arrange shipment and send original documents or telex shipment

		Address: No. 2, Hengfeng Road, Science and Technology Industrial Park, Nanhai District, Foshan City, Guangdong Province, China
		Tel: 0086-18942424342
		WhatsApp:0086-18942424342
		WeChat: 0086-18942424342
		Recipient: Ms. Zhang Jun
		Showroom: https://screwpump.en.alibaba.com
		www.screwpump.top

More styles in our showroom!>>>>>www.screwpump.en.alibaba.com