icooler-1005 High and low temperature laboratory Circulating pump wholesaler

The iCooler 5-Rated Cryogenic Circulating Pump is the laboratory's basic thermostatic device, providing the lab with a small, economical and environmentally-friendly cooling solution. The compact design is conveniently placed in the fume hood and on the tabletop. The cooling circulation pump uses a centrifugal suction pump with a pressure/suction force of 0.3/0.2 bar (head 5m) and a flow rate of 22L/min. Use up to 100 degrees

1. Product characteristics:
    waterproof keyboard design, highlight LED display;

 Small size, can be used directly on the desktop and in the fume hood;

 Environmental refrigerants, non-toxic pollution;

 Convenient injection and drainage;

 Many protection functions, high voltage protection and over current protection

 The pump pressure and flow rate are automatically adapted to the external load, which effectively protects the external equipment, especially glass components from damage.

 Alarm and warning of lights and sounds at the same time, various alarm codes are directly displayed, and the error points can be directly determined

 Temperature settings are automatically saved

 advanced proportional cooling control technology, good temperature stability;

 CIT refrigeration technology, high temperature starts cooling at any time even at 100°C;

 The maximum temperature and minimum temperature of the machine can be limited

 The buzzer can be set silent or sound

A variety of operating modes are optional

1) Mode 1: When the power is turned off while the device is running, the next time the device is powered on, it is in a normal stop state and the set value can be changed.

2) Mode 2: When the power is turned off while the device is running, the next time the device is powered on, it will automatically run and the set value can be changed.

3) Mode 3: When the power is turned off while the device is running, the next time the device is powered on, it will automatically run and the set value cannot be changed.

Pt100 temperature sensor for single and two-point temperature calibration

 Refrigeration heating and circulation functions can be controlled independently or simultaneously

 Device serial number can be checked by software

 maintenance-free pressure / suction pump, resistant to fiber and metal particles, long life;

 Intuitive liquid level window, convenient for users to observe the liquid level;

Water tank set protection overflow;