Small type rebar steel making machine/ rolling mill

Luoyang Hongteng Electrical Equipment Co.,Ltd is located in luoxin industry zone, luoyang city,Henan, China.

Our main product is Induction melting furnace,steel bar Rebar production line,hot rolling mill machine, Aluminum billet production line etc.

Our company have 20 years experience to produce induction furnaces. Our equipment production is rigorous & serious, every step of production process has special person to monitor. Machine can be customized for each customer's different requirement .We already got ISO 9001 ,CE etc certificate.

We also supply good after sell service for our customers.we supply installation and training worker service till machine start to normal production. Our good after-sell service gives us more returned customers.In order to give customer more good after sell service,we opened after sell service offices in vietnam and indonesia.

We have been selling our machines to many famous company in china and overseas, such as Vietnam,Indonisia,Myanmar,Qatar,Iran,Ukrain etc .we also have foreign trade after sell service office. Welcome customers to visit our factory.

Our company supply all kinds of steel wire /rebar/bar making machine

1.1-3t/hour steel bar production line, final bar size range is 8-32 mm,most use for build for small rolling mill.we have half-automatic/fully automatic steel bar production line machinery.we can also design machinery under customer's invest.so the more of your suggestion will be best for us.
2.The raw material can be scrap metal or billet.For capacity 1-3 t ,our suggestion billet size can be 40*40mm,50*50mm,60*60mm, 1000 - 6000 mm long,under this size in production will be the smallest machinery investment.
3. the whole steel bar production line new need heating furnace for billet, the heating furnace can use gas/electric/oil ,we can under your requirement design the whole line.
4. About the cooling bed .you can use or not both all right.
5. we will supply the whole line installation & debugging service,till machine to normal production.
6.The more of your detail requriement,will help us alot to design the suitable steel bar production line for you.
7.welcome to visit us and have a face to face negociation.

Rolling mill is mainly used in steel factory which produce deformed bar, wire rod, channel steel , flat bar,steel plate or other products.
Deformed bar hot rolling line is divided into continuous rolling and semi-continuous rolling.For continuous rolling, rolling type is double-groove single-line.
Billet hot charging and directly rolled reduces the billet storage procedure compared with traditional production type. It reduces storage area, as a result factory area is reduced and investment is saved, cash flow is increased at the same time. Billet hot charging and directly rolled make cold billet heating procedure before rolling unnecessary; it increases yield rate, reduces energy consumption and lower the production costs to attain better economic benefits. It also reduces scale generated in heating furnace by secondary heating and increases 0.3-0.5% yield rate.

Technical parameters of rolling mill 

Rebar making line/rolling mill

Rebar steel making machine 

The production of 5 tons is recommended to use billet 60*60, which can save investment costs and better match the production requirements.
This type of rolling mill is divided into 3 categories: 1. Simple, 2. Semi-continuous rolling, 3. Continuous casting and rolling
According to the customer's raw materials, production, investment costs and current conditions, we recommend the most suitable steel production line to our customers. If the billet is 5 tons of raw material, 60x60 billet is recommended, and 7-10 tons is recommended to use 90 billet. This can be based on the customer's final product specification and the customer's existing billet.
two types rebar Steel making line :
1. Raw material is scrap steel iron
melting→Continuous casting machine→Hot rolling mill→Cutting machine→cooling bed→ packing table
2. Raw material is steel billet
Billet heating furnace→Hot rolling mill→Cutting machine→ cooling bed→ packing table

Main parameters of scrap steel melting furnace 

Medium frequency induction heating power supply

Scrap steel medium frequency melting furnace

Continuous casting machine

Steel billets preheating furnace 

Advantages of induction steel billets preheating furnace:
1. The utility model has the advantages of obvious energy-saving effect and 20% saving compared with common equipment.
2. it is with high power factor and keeps over 0.98 with high order harmonic wave pollution.It is no need to add reactive power compensation device and harmonic wave control device.
3. It can achieve that one power supply cabinet for two furnaces.Transformer utilization rate is high.
4. The two furnaces can cast simultaneously and also can supply continuously molten steel casting.
5. Arbitrary power allocation, starting rate of 100%

Cooling bed for rebar making machine

 (Plywood) wooden case for packing steel rolling mill and steel bar line machine

Q1: Our workers are not professional on the induction furnaces, how can we solve that?
A1:Don’t worry, when the induction furnaces arrive at the clients’ plant, our engineer will go and assist in installation, commission, and training until the workers can operate by themselves.

Q2:Which kind of power supply do you supply? Electricity or gas?
A2:Electricity.

Q3:What about your package? If damages happen, how do you solve?
A3:We take container loading, wire fixing. If damages occur, we will send the spare parts for you.

Q4:How can I trust your company and machine?
A4:Our factory have been in induction equipment ,induction furnace and product parts for around 15 years , entering alibaba for ads .And our machine have exported to East Asia, South Asia, the middle East Asia, Africa etc. areas and have a good feedback with no complaints.

Q5: Is it all right to make customer's own brand name?
A5: Sure, with your authorization of brand. We accept OEM service.

Q6: How do you control the quality?
A6: We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.

Q7: How long is your delivery time?
A7: Generally it is 7-14 days if the parts are in stock. or it is 25-30 days if the parts are not in stock, it is according to quantity.

If you are interested in rebar making machine/rolling mill,please feel free to contact us. Our professional engineer will recommend you the best suitable machinery,according to your capacity and finished product specifictions.