China manufacturer latest technology new product automatic dry mortar production line

What is dry mortar:

Dry mortar is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing. It can be used directly just by adding water in construction site. It has different properties though adding different additives. The demand for dry mortar has increased rapidly due to its outstanding merit compare to the mortar production in job-site.

Raw material of dry mortar:

1.  Cementing material: cement, lime, plaster.

2.  Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.

3.  Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.

4.  Water-retention and thickening material.

5.  Chemical additives.

Descriptions of MG automatic dry mortar production line:

MG series dry mortar production line is based on the latest design concept in Europe, this production adopts the advanced computer auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration. The production line consists of storage system, metering and batching system, conveying system, mixing system, air compressor system , packaging system, and dedusting system, etc

Mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed. Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous auto-packaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.

Features of MG automatic dry mortar production line:

1. It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.  

2. The dry mortar production line uses a centralized control system, making the equipment easy  to operate.

3. According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2.

4. We can provide one-stop service from design to installation according to our customers' specific requirement.

Technical parameters of MG automatic dry mortar production line:

Material storage silo equip on MG automatic dry mortar production line: 

 Weighing hopper equip on MG automatic dry mortar production line: 

Twin shaft mixer equip on MG automatic dry mortar production line: 

Finish product hopper and automatic packaging machine equip on MG automatic dry mortar production line: 

Impulse dust collector equip on MG automatic dry mortar production line: 

PLC Control cabinet  equip on MG automatic dry mortar production line: 

Application of MG automatic dry mortar production line:

The dry mortar production line can produce the following dry mortars: Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.

We mainly engaged in providing turn-key service to numerous customers with engergy-saving and efficient practical solutions. Main advantage of dry powder mixing equipment from Zhengzhou MG (compared with other suppliers): 

1. Over 17 years experience in this line. since 2000, Zhengzhou MG dedicated in the research and development of dry powder mixing equipment for decades, we are in a leading position in this trade; 

2. Qe provide to customers with combat experience of decade years of construction management and multiple efficient project solution. 

3. The special additives from Zhengzhou MG guranteed the quality of dry mortar from our clients. 

We promise to all customers that: upon you choose our services and products, we will provide the first-class product quality, latest technology in mortar formula, and special additives; we ensure the good quality of dry mortar produced by our equipment. 

1) Unpon got your inquiry, We will reply to you in 24 hours.

2) Assist clients to prepare for the first construction scheme and supply foundation drawing.

3) Oversea installation and provide technical exchange, train client to operate the machine.

4) Supply spare and accessory parts at favorable price for long-term.

5) Spare part are original, authentic, good quality, can be avaible from stock, and sent to client, immediately by DHL, EMS, Fedex, and by air, gurantee client to receive it in shortest time. Strict site quality inspection system:

Installation captain inpection: Evaluate the installation level of dry mix mortar production line, Spot QA engineer inspection: Inspect the whole in installation process and key components.

Service engineer inspection: Inspect the debugging and running condition of whole production line. 

1, How about the investment of this project?

 A: Our engineer can design the dry mortar plant as your requirement and your budget, different dry mortar plant investment are difference.

     Low capacity low cost, we will provide you cost effective solutions as your requirement.

2, What's the difference between full automatic dry mortar plant and Semi-automatic dry mortar plant?

A: (1)  Semi-automatic dry mortar plant is cheaper than full automatic dry mortar plant.

    (2)  Semi-automatic dry mortar plant do not need to equip silos while full automatic dry mortar equip material silos.

    (3)  Semi-automatic dry mortar is manual feeding and automatic weighing and packaging, Full automatic dry mortar plant is automatic feeding and automatic weighing and packaging.

3,  How many people required to operate this dry mortar plant?

A: Usually 2-4 workers are enogh to operate this dry mortar plant.

4,  What equipment and service you can provide?

A: We can provide you turnkey solution of dry mortar plant from working site planning to dry mortar machines,   transportation, installation and training, formula of dry mortars, after-sales services, life time technical support etc.

5, What is the area required for this dry mortar plant?

A: According to the capacity of the dry mortar plant, the area required 300-100 m2.

6, What is the total power consumption (KW) of this dry mortar plant?

A: It is 20-80W based on the capacity of the dry mortar plant.

7, What is the capacity of your dry mortar plant?

A: We have dry mortar plant with capacity 3-30T/H as your requirement, and also we can customize the dry  mortar plant as your capacity requirement.

8,  How long is the guarantee period?

A: 12 months, within this period, we provide you spare parts and services for free.

9,  Can you install the dry mortar plant in my country?

A:  Yes, we will send engineers to your country for guiding installation and training your workers to operate the machine.

If you want to know more of our dry mortar plant, please send us inquiry or contact us directly.