Titanium tube aquarium evaporator 2.75KW to 27.5KW

 Titanium heat exchanger evaporator for aquarium or aquaculture

Titanium has a strong corrosion resistance, and the corrosion in sea water is basically zero. It is not easy to produce oxide layer on the surface. It does not pollute the medium and is environmentally friendly and non-toxic. The shell can be made of PVC, titanium, stainless steel, etc. Titanium tube heat exchanger effectively prolongs the service life of heat exchanger in special occasions, and costs less maintenance. It also has the advantages of small size and strong heat transfer capacity.

Purpose:

Titanium tube heat exchangers can be widely used for temperature control in swimming pools, aquariums, aquariums, sea water baths, plating tanks, marine heating and cooling systems of chemical equipment. It can also be used in anti-corrosion areas such as seawater utilization and surface treatment industries. In addition, the titanium tube heat exchanger is also used in food, distilled water, pure water, brewing, beer, beverage, soilless cultivation, pharmaceutical, cosmetics and other industries. It can also be used in the field of environmental protection, such as waste gas condensation recovery, pollutant (solvent) recovery and so on.

Structure Feature

The inner heat converter is made of seamless pure titanium, which has strong corrosion resistance, high heat transfer efficiency, non-magnetic, non-toxic and good heat resistance.

The outer barrel is made of high strength plastic injection moulding, solvent pressing and synthesis. It has good chemical stability and is not affected by environmental factors and medium composition in the pipeline. It has good corrosion resistance, low heat transfer efficiency, good insulation and heat preservation, and good energy saving effect. It is welded by professional process.

Detail parameters

 Seamless pure titanium tube, and the grade is TA1. There are 52 bar high pressure test and precise halogen leaking test in production, makse sure they are not leak.

Some of our plastic shell is no longer a traditional plastic welding process. The top and base are made of special PVC moulds by one-time injection moulding process, which meets the ROHS environmental protection requirements. Thanks to its perfect structure design, it can with stand high pressure and the maximum pressure is 2.1 Mpa.

The shell of the evaporator is covered with an insulating sponge, which can further improve the heat exchange effect and service life of the evaporator.

APT titanium coil tube heat exchangers with excellent ability for heat exchanging and adaptation are widely used for:

1. Heat pump water heater condenser

2. Condenser/evaporator for aquarium or aquaculture water chiller

3. Condenser for pool heat pump

4. Condenser/evaporator for water(ground) source heat pump

5. Cooler or regenerator for CO2 heat pump air

6. Condenser/evaporator for marine AC

7. Condenser for ice machine

8. Evaporator for water purifier

9. Evaporation or condenser for mariculture constant temperature machine

10. Condenser for dish washer

For our customer

1 We provide our products to our customers all over the world. The APT Respect all customers’ local laws, customs, religious beliefs, etc. All APT employees shall not discriminate against any individual in any country.

2 Providing our best products and services to meet the needs of our customers is fundamental to all of us.

For our Employee

1 Every APT employee is an equal individual. Our work content is different only because of the different division of labor. APT zero tolerates any person in the company who insults or assaults other employees.

2 APT employees have basic professional ethics. Including but not limited to: do not infringe on the privacy of others; do not use company resources for private activities; do not maliciously defame the reputation of the company; refuse to fraud technical, financial and business data.

3 Encourage every employee to continue learning and improve their self-integrated ability. The company establishes scholarships to provide tuition reimbursement services for employees during their working period.

APT regards each employee as a partner.

For our quality

1 The basis of production operation is certification of Stand Work issued by Engineering Department.

2 Production departments formulate detailed production plans and strictly implement them. Delays due to non-objective reasons must be reviewed in writing, including cause analysis and corrective measures.

3 Quality, production, business, finance and other issues happen daily, must be submitted to the QCPC system.

4 For major quality problems, there must be DIVE process, including defining problems, investigating and analyzing, finding out the root causes, proposing corrective measures and tracking the complete process.

APT’s story

APT, Foshan Applied Process Technologies. We focus on two technologies application: thermal spraying and heat exchanger.

Our heat exchanger plant was set up in 2008, and soon encountered the well-known financial crisis, the economic environment suddenly deteriorated, and we immediately faced the problem of survival. Lowering quality and service standards has become the last trump card of many peers, but this goes against our original intention. We adhere to quality and service. For this reason, we have paid a price. A number of customers have lost, and some shareholders have withdrawn their capital, resulting in an unprecedented financial crisis. But we also got a surprise: after a few months, our lost customers came back with new products and cooperation. These customers are now our most loyal partners.

Over the past 10 years, whether it is to open up the market or to improve the satisfaction of the original customers, we rely on: Never say YES to poor quality and service.

APT's thermal spraying team began to study thermal spraying application technology in 2010. Fortunately, the company currently has a very professional thermal spraying technology team. Especially in aviation and paper machinery applications, we have been providing very professional products and services to domestic customers. Now, APT is the specialist applicator of thermal spraying, we produce a variety of thermal spraying coating, including HVOF, plasma, Arc, D-gun coating, we can provide coating detection and evaluation services, we can provide training services for coating research and development, we provide thermal spraying equipment design, thermal spraying production consumables. I believe that the company's strong technical background, will be able to meet customer demand for thermal spraying process.

Because of our reliable quality and 24-hour service support, we are particularly favored by exporters. According to incomplete statistics, 70% of our current business is exported overseas through traders. With the increase of business, quality management and service problems become more and more prominent. As we all know, TRADERS’ service to overseas customers is microphone-like. In many cases, it cannot solve customers' problems in a timely and professional manner. Overseas customers also cannot have the most favorable price and professional service provided by us as manufacturers. You know “focus on satisfying customers’ needs” is our company's way of survival. In order to enable global customers to have our more professional and direct products and services, we have carried out a series of restructuring and adjustment, which is now APT company.

Note: The products displayed by our company can not be reproduced and released without permission. When you browse the product, if you have any questions about some information, please contact our customer service directly. Since most products need to be customized according to customer requirements, the final product parameters are based on the purchase contract.